|
|
|
 |
Landscape Drip Irrigations
Drip Irrigation Parts and Instructions for all of Your Needs |
|
|
|
SOLUTION |
|
Pressure Compensating Multi-Outlet Device on a PVC Lateral
Advantage:
- Up to 60% water savings
- Durable installation in high maintenance areas
- Targeted watering reduces weed growth and extends life of mulch
- Native plant life helps reduce water usage
|
|
|
INSTALLATION & MATERIALS LIST |
Click-n-Buy - Click on Part Number to Add Items to Your Cart |
Part Number |
Description |
XBT-10-6 |
1.0 GPH Multi-Outlet Manifold |
1/2" Riser |
Sch 80 Riser 1/2" MPT |
PT-025 |
1/4" Distribution Tubing |
TS-025 w/CAP |
1/4" Tubing Stake with Bug Cap |
PVC Misc |
|
To-Do List
Description |
Time (Approx.) |
| Trench, cut, and glue PVC laterals. |
1 hr 20 min |
| Assemble Control Zone Kit and position in valve box |
20 min |
| Connect Control Zone to water source and laterals |
1 hr |
| Thread 1/2" riser into PVC and thread XBT-10-6 onto riser. |
5 min / Assembly |
| Connect 1/4" lines to manifold outlets and run to sparse plantings. |
5 min / Line |
| Stake in place and add bug cap to end of lines |
3 min / Stake |
| Flush system for 2 minutes. |
2 min |
| Add planting material and mulch |
|
Installation and Maintenance Tips
Description |
| Flush the zone after installation and once a year. |
| Install Drip Emitters in XBD-80 with self-piercing barb end up. |
| Adjust water time as seasons / weather changes. |
| Leave 6" slack in 1/4" tubing in case of unexpected maintenance. |
Click-n-Buy - Click on Parts in Picture Below to Add Items to Your Cart
|
|
|
|
Copyright © 2010 IrrigationRepair.com - All Rights Reserved |
|
