|
|
|
 |
Landscape Drip Irrigations
Drip Irrigation Parts and Instructions for all of Your Needs |
NARROW PLANTING BEDS
NEXT TO A STRUCTURE
Raised Bed Application
|
| |
SOLUTION |
|
Xeri-Pops and Multi-Port Nozzles on a Poly Lateral
Advantage:
- Up to 50% water savings
- Quick installation plus the benefits of low volume
- Multi-port nozzles are easy to maintain and offer watering pattern capability
|
|
|
INSTALLATION & MATERIALS LIST |
Click-n-Buy - Click on Part Number to Add Items to Your Cart |
To-Do List
Description |
Time (Approx.) |
| Trench beds (2 - 6 inches deep), cut and lay out poly lines |
30 min per 50 ft |
| Punch SPB 025 connector into poly laterals. Attach 1/4" tubing to outlet barb and run 1/4" tubing to edge of bed. |
10 min per 20 ft |
| Connect 1/4" tubing to inlet barb on Xeri-Pop. Dig small hole (4" wide x 12" deep) for Xeri-Pop. |
20 min per 50 ft |
| Determine desired watering pattern and punch nozzle base (see instructions) to match planting area. |
5 min per Nozzle |
| Grasp orange pull-ring on top of Xeri-Pop and pull stem up exposing thread area for nozzle. Drop 30-mesh screen into stem and thread nozzle onto stem. |
3 min per Nozzle |
| Drop Xeri-Pop into hole so the cap is at grade. Fill in dirt around Xeri-Pop so the body is supported in the soil and exit port for nozzle is in the correct position. |
10 min per Xeri-Pop |
| Flush system for approximately 2 minutes. |
2 min |
| Install planting material |
|
Installation and Maintenance Tips
Description |
| Flush the zone after installation and once a year. |
| Install XB Drip Emitters with XM Tool for 50% faster installation. |
| Leave Landscape Dripline coil in the sun while preparing for installation. |
Click-n-Buy - Click on Parts in Picture Below to Add Items to Your Cart
|
|
|
|
Copyright © 2010 IrrigationRepair.com - All Rights Reserved |
|
